Dimensia FKC2600E and FKC2601T Monitors

Notes:

• The FKC2600E (black) and FKC2601T (wood grain) Monitor/Receivers are identical except for the external styling of the units.
• In 1985, RCA introduced the Digital Command Component series. The fundamental component of this "RCA Audio System" is the MSR140 Stereo Receiver, which provides system control functionality for audio components only, with no need to purchase a Dimensia television.
• In 1987 RCA introduced the 27" FRP2722 Dimensia Monitor/Receiver in the CTC140 chassis. This replaced the FKC260x units.
• In the 1987 Dimensia system, the system control function was also available in the MPT200 Audio/Video Control Center and the MSR250 Audio/Video Receiver.

Specifications:

• Color Standard:
  525 line NTSC color
• Chassis:
  CTC131, solid state, unitized
• Picture Tube:
  26 inch (diagonal) 110-degree Coty Full Square Precision in-line with high-potential, bipotential gun, super arched shadow mask, striped, pigmented phosphors, and integral contrast enhancement filter
• Remote Control System:
  Digitally encoded infrared light
• Power Cord:
  Type SJT, 3-wire shielded
• RF Tuning System Type:
  Multiband frequency synthesis
• RF Band Coverage:
  VHF channels 2-6, 7-13
  Midband channels (A-5) - I
  Superband channels J - W
  Hyperband channels (AA) - (QQ)
  UHF Channels 14 - 83
• RF Frequency Coverage:
  54 - 402 MHz, 470 - 890 MHz
• Tuner Type:
  Solid state
• Channel Access:
  Direct access keyboard, programmable Scan Up/Down
• Channel Indication:
  On-screen
• Antenna inputs:
  Three 75-Ohm VHF inputs
  75-Ohm UHF input
• Sensitivity:
  1.14 pW, VHF; 3.0 pW, UHF
• Off-set Channel Pull-in Range:
  +/- 3 MHz; +2.5 MHz -3.5 MHz, off-the-air (single channel)
• Luminance Bandwidth:
  4.2 MHz (limit)
• Black-to-White Rise Time:
  54.0 ns (RF in max. peaking)
• Luminance Resolution:
  Greater than 350 lines
• Chroma Bandwidth:
  I axis, 1.5 MHz
  Q axis, 500 KHz
• Video Input:
  1 V, P.P.; 75 Ohms; negative sync
• Video Output:
  1 V, P.P.; 75 Ohms negative sync
• HV @ Zero Beam Current:
  28.2 kV, nominal
• RGB Resolution:
  500 lines, minimum
• Bandwidth:
  6.2 MHz
• RGB/Enable:
  TTL Compatible
  Hi (color on) = min 2.4 V (no current required as Monitor has internal 3.65 V pull up voltage through 65 Ohm resistor)
  Lo (color off) = less than 1.5 V; less than 50 Ohms impedance; able to draw minimum 30 ma.
• RGB Sync:
  0.25 V to 1 V P.P.; negative polarity
• Audio Frequency Response:
  50 - 15,000 Hz
• Stereo Performance:
  BTSC system, three channels (L, R, Audio-B)
• Stereo/Mono Switching:
  Automatic
• Audio Input:
  680 mV +/- 280 mV RMS
• Audio Input Impedance:
  16 kOhms
• Audio Output:
  Selected Out: 400 mV RMS @ 600 Ohms
  System Audio: 400 mV RMS @ 600 Ohms
  To Hi-Fi: 1.5 V RMS @ 600 Ohms (maximum volume controlled)
• Speaker Types:
  Two 5" high compliance woofers
  Two 2" tweeters
• Speaker Impedance:
  Internal, 16 Ohms nominal
  External, 6 Ohms or greater
• Power Source:
  120 Volts (+/- 10%), 60 Hz
• Power Consumption:
  134 Watts average, 157W max.
• Dimensions:
  25.3" x 21.8" x 18.7"
• Weight:
  100 lbs.